How to Use SIGHTRIGHT for a Stun-Shot Setup Check

Separate the stun decision from the setup check

A stun shot is a complete cue-sports task, not one visual label. You select a direction, intend a particular cue-ball contact and choose a pace for the table and layout. Actual contact, cue path, speed and impact then affect how the cue ball behaves. SIGHTRIGHT does not calculate any of those variables.

Its useful role is narrower. Once you have selected the direction independently, the trainer can give you a stable visual reference for a short no-hit observation. Follow the order choose, observe, remove, play. Do not move the device while you are still changing the shot line, and do not use its left, centred or right description as an aiming instruction.

Begin with a familiar, comfortable layout that leaves generous room for the cue, bridge hand and body. Avoid combining stun with side spin, a difficult reach or a power requirement in the first block. Those extra demands make it harder to know what changed.

Build a stable no-hit baseline

Place SIGHTRIGHT only after the direction has been chosen. Keep the silver centre line and raised reference planes visible, and make sure the trainer, cue ball and surrounding cloth are arranged safely. The reference-plane placement guide explains the curved notch and visual planes; use it rather than copying the apparent angle of an unrelated photograph.

For the baseline, use a simple centre-ball intention. Begin from your normal upright starting area, walk in, settle without feathering and describe what you see as left, centred, right or unclear. Also note balance, bridge stability, breathing and cue clearance. A comfortable repeatable view is useful even when it is not centred.

Stand fully upright and step away after every observation. Three to five complete resets are enough for an initial pattern. If the device moves, the cue or hand touches it, or you cannot approach naturally, stop and rebuild the layout with more space.

Add one stun intention without striking

Keep the cue-ball position, selected direction, SIGHTRIGHT placement, starting area and general bridge length unchanged. Now add one clearly worded stun intention. The intention belongs in your notes; it is not something the trainer can verify.

Make another three full-reset entries. Let your normal routine create the settled position. Do not slide the cue sideways, force the head over a preferred label or adjust the feet after you are down. Record whether the view stays understandable and whether balance, bridge and cue freedom remain comfortable.

If several variables changed, mark the comparison unclear. A new bridge length, tighter grip, altered cue elevation and different starting position cannot be assigned to one cause. Repeat another day with fewer changes rather than trying to rescue the block.

Stop immediately for discomfort, restricted cue movement, loss of balance or visual discomfort. SIGHTRIGHT is not a medical or vision-correction device, and a practice label is not a reason to force the body into a fixed position.

Remove the trainer before feathering or striking

Lift SIGHTRIGHT from the table and put it where the cue, balls, bridge hand, clothing and any rest cannot contact it. Removal comes before practice strokes and every strike. Rebuild the selected line with your ordinary pre-shot routine.

Start with a few slow cue movements, then play a small number of comfortable stun attempts. Keep separate notes for intended contact, observed tip mark if safely visible, cue delivery, speed and cue-ball response. A made ball does not prove every part was correct, and a miss does not automatically invalidate the earlier no-hit setup observation.

If the intended result is a stationary cue ball from a simple straight-in layout, use the separate stop-shot setup check. If you later compare a draw intention, use the draw-shot setup guide as a separate block. Use the follow-shot setup guide for a forward-roll intention, or the side-spin setup guide when side is added, so only one new intention is introduced at a time. The post-SIGHTRIGHT practice guide gives a gradual path back to normal independent play.

Review only what the check can show

Compare the baseline and stun-intention entries only when the chosen direction and device placement stayed stable. Ask whether the walk-in remained comfortable, balanced and free of contact. If the labels varied, first review placement, lighting, full resets and fatigue before changing technique.

Judge the actual stun shots as complete shots. Tip contact, cue path, pace, cloth, balls and impact can all change the result. The trainer cannot certify aim, a contact point, a speed or a cue-ball outcome, and it cannot guarantee accuracy.

For current photographs and confirmed product details, visit the SAILY CUE SIGHTRIGHT product page. End the device check when its narrow setup question has been answered, then give the rest of the session to normal cue-sports practice.